Create the vCenter Tenant

About this task

Add the VMware vCenter Server to the XCO vCenter Service instance. Do the following:

1. Use the efa tenant create command to create your tenant entry. When creating your tenant, ensure that you provision adequate number of VLANs that are available for use.
2. Once you have created the new tenant, verify that the devices you added are added to the correct fabric. Use the efa inventory device list command to do so.

Results

This command will create a tenant entry that is used when registering a VMware vCenter Server with XCO.

Example

This command creates a tenant entry with the name vcenter-10.24.85.111.

$ efa tenant create --name vcenter-10.24.85.111 --vlan-range 2-4096 --port 10.9.9.20[0/10],10.9.9.30[0/10] 
            

Use this command to verify if the devices that you have added to the fabric are associated with the correct fabric.

$ efa inventory device list


root@ubuntu:~# efa inventory device list
+------------+-----------+-------+--------------+----------+-------+------+--------------+
| IP Address | Host Name | Model | Chassis Name | Firmware | ASN   | Role | Fabric       |
+------------+-----------+-------+--------------+----------+-------+------+--------------+
| 10.9.9.20  | FRE-134   |       |              |          | 65001 | leaf | efa-fabric-1 |              
| 10.9.9.30  | FRE-135   |       |              |          | 65001 | leaf | efa-fabric-1 |              
+------------+-----------+-------+--------------+----------+-------+------+--------------+
Device Details
--- Time Elapsed: 32.932576ms ---